Settings Menu - ITCU Operator's Manual – Coloreel Support

v2.0.0

Settings available in the Operator Panel settings menu

Settings menu

When you select Settings (A) in the operator panel, the following list of settings shows (B).

Select Settings.
Select a setting to enter from the Settings menu (B).

Select Network in the Settings menu

Uncheck (A) to set a static IP address for the Coloreel ITCU unit.
Uncheck (B) to manually set a DNS server for the Coloreel ITCU unit to connect to.

Note: It is recommended to use the default network settings.

Select Status in the Settings menu

Select Status to see the status of the ink cartridges levels and waste tank level. You can see how much space that has been used on the internal storage of the Coloreel ITCU, and how much space that remains. You can also see the humidity and temperature gauges of the print engine. The blue and green fields of the gauges indicates that the humidity and temperature is in normal range. Yellow indicates warning and red indicates that there is an error.

The status page shows the parameters that follow:

Ink levels, type expiration date and status on each cartridge.
The used space of the local storage on the Coloreel ITCU.
Humidity and temperature gauges of the print engine. The blue and green fields of the gauges indicates that the humidity and temperature is in normal range. Yellow indicates warning and red indicates that there is an error.
Waste tank level.

Note: You can also open the status page if you click on the status bar in operator panel.

Select Control in the Settings menu

Select Control to start or stop the warming up process of the fixation module

Select Color Change Precision (CCP)

Embroidery machines have a natural variation on thread consumption. High quality embroideries occurs when the precision of the color changes are optimized. The Coloreel ITCU has a function that optimize the color change precision through estimations of the thread consumption.

Select Color Change Precision in the Settings menu to select an active setup (C)

Select General

Select General to select another language (D). You can activate dark mode, for a display mode with darker colors for the background and lighter colors for text (E). You can also see more information about the software licenses that is used on the Coloreel ITCU (F).

Select Account

Select Account from the Settings menu to logout from the Operator panel