Embroidery machine settings - MELCO - recommended for the Coloreel unit February 28, 2023 11:30 Updated MELCO embroidery machine settings that are affecting stitch counting at the Coloreel unit. These recommendations will improve CCP Stitch counting is important to maintain a good Color Change Precision and to handle Thread breaks and Start at Stich well. With correct settings, you should expect an accuracy of just a few stitches in almost all cases. Melco OS v.11 settings Coloreel ITCU settings Menu position Setting name Recommended setting Setting name Recommended CCP settings Tools menu – Settings. Machine tab Enable Tie In / Tie Off Off Jump convert 3 Tools menu – Settings. Machine tab Backup On Thread Break Upper: 0 Bobbin: 0 Tie ins 0 Tools menu – Design Filter Stitch Filter Uncheck all fields. (Except for the max stitch length) Tie offs 0 Thread break ties 0 Melco DesignShop v.11 settings When used to create a DST-file for Coloreel Tie stitch length 0.5 Tools menu – Filter – Design Filter Stitch Filter Uncheck all fields Advanced mode Right-click in the design window – Project tab Connector Stitch Length 120 pt (12.0 mm) Remove DST stitches without any length On Save as DST – Tajima File Options (appears after the Save as… dialog) Jumps per trim 1 Stitch sensor mounted on the main shaft On (set to Off, if the optic sensor is mounted) Additional main shaft rotations during trim 1 Additional main shaft rotation during color change 2 Download printer-friendly .pdf here... Comments 0 comments Please sign in to leave a comment.
