Settings: Software Update - Advanced Operator's Manual May 12, 2022 13:14 v2.0.0 Software Update It is possible to update the software of the Coloreel ITCU in both online and offline mode. Caution: When you do an update from versions earlier than 1.2, keep the channel that is currently in use. When you have successfully upgraded the software to 1.2, please use the recommended channel, Stable channel, when you update to versions 1.2.X and later. Note: Updates from earlier version may not provide information about the progress of the update. To select software channel Click on Stable channel (A) or Beta channel (B) in the update software window. Click on refresh (C) to save your choice. To do an online software update When there is a new software version available in the channel that you currently have as active, you will be notified with the Software Update Available notification. Click on the Install update button (A). A pop-up window will ask you to set the unit in Service Mode. Click on the Green checkmark button. Click on the Continue button (B) to start the software update. Note: Do not power off the Coloreel ITCU until the update is complete. To do an offline software update Speak to a Coloreel distributor to get the software update files on a USB-drive. Make sure that the .ITCU-file is unpacked and not in a ZIP-file. Put the USB-drive with the software update files on in the USB port of the Coloreel ITCU. Click on Install update (A). A pop-up window will ask you to set the unit in Service Mode. Note: if the Offline Update Available is not shown, refresh the web browser. Click on the Green checkmark button to start the software update. Note: Do not power off the Coloreel ITCU until the update is complete. Comments 0 comments Please sign in to leave a comment.