Embroidery machine settings - ZSK - recommended for the Coloreel unit November 01, 2022 14:39 Updated ZSK embroidery machine settings that are affecting stitch counting at the Coloreel unit. This recommendations will improve CCP Stitch counting is important to maintain a good Color Change Precision and to handle Thread breaks and Start at Stich in a good way. With correct settings you should expect an accuracy of 1-2 stitches in almost all cases. Recommendations for ZSK T8 Operator unit-series Coloreel recommended setting in Bold reflects changes from ZSK (T8 Operating unit series) default values ZSK T8 Operator unit-series ITCU Menu position Setting name Recommended setting Setting name Recommended CCP setting in the ITCU L2 Shift+U0 L5 Start stitches after trimming 0 Jump convert 3 L2 L6 Shift+U0 L6 Axis override Set to Default (0, 127, 0, 127) Tie ins: 0 L3 Shift+U0 L5 L2 Fill stitch optimization Turn off Tie offs: 0 when loading .DST-file Optimizing Trimming, 3 Jump stitches. Max stitch length: 121 INC Thread break ties: 0 Tie stich length: 0.5 Remove DST stitches without any length On Stitch sensor mounted on main shaft On (off if the optic sensor is used) Additional main shaft rotations during trim 1 Additional main shaft rotation during color change 2 Download printer friendly .pdf here: TSD.10018.1 ZSK_Coloreel CCP Settings.pdf 100 KB Download Comments 0 comments Please sign in to leave a comment.