ITCU Software Release v1.9.3 February 09, 2022 11:03 Updated Compared with v1.8.2 Release date: 2022-01-04 General With this new software an advanced operator can create CCP setups in the Operator Panel and operator can easily change setup before starting a print. For a multihead setup, the operator will now select CCP Setup on the host and the CCP Setup will be distributed to all the clients from host, so the operator only needs to make the setup once. The ICC file is updated to be more correct when defining printable colors and will reduce the amount of ink to be used with same or better color precision. Software versions Snap ICM Rev 4662ICM v1.11.3CTL v1.8.2HDB v1.09 Main Features CCP setup batch flow - automatically create embroidery/material specific setup. Add CCP setup handling to OP Broadcast CCP setup to multihead clients. New ICC profile introduced New color volume limiter introduced ICC, linearization, and amount of ink is now part of the Color Profile File (CLP) Updated start marker Settings navigation has changed to dropdown menu. Other Features Raise low ink warning threshold to 10% When printing a noise (and striped) swatch file the pattern will continue indefinitely when reaching the end of embroidery Removed start marker creating from Service Tool Only critical error will disable the print Log in setting for access via PC Updated print engine calibration workflow Fixes Improved handling of files that is locked Washer fluid empty notification is reset when filled up, no restart is needed Prevent Printing when temperature is above 31.8°C Correct notification image for open Back Door help page Prevent software mismatch error when multiple clients booting up simultaneously Hotfix v1.9.1, v1.9.2: Refresh of display due to status updates for multihead group Hotfix v1.9.2: Changed how to report an IP address change at start up in multihead setup Hotfix v1.9.2: Improved startup handling of motors in ITC-U (Stepper motor) Hotfix v1.9.2: Disabled client is not pausing the rest of the multi head group when in printing. Known issues Operator Panel and Service Tool:In page Settings->CCP the Advanced option do not work correctly. Option will not be visual active and when in Advanced mode some Embroidery Machine settings cannot be performed. Workaround is to push the advanced button again to leave Advanced Mode. Service Tool: Operator Panel: CCP Setup before print When logged in as admin from PC. When logged in as operator from PC or on ITC-U display. Color profile settings Only available when logged in as admin. Settings navigation has changed to the dropdown menu Log in for PC-client If user log in via PC user will see the user credentials by icon to the left bottom. Admin: Operator: Comments 0 comments Please sign in to leave a comment.
