Embroidery machine settings - Tajima - recommended for the Coloreel unit October 13, 2022 09:34 Updated Tajima embroidery machine settings that are affecting stitch counting at the Coloreel unit. This recommendations will improve CCP Stitch counting is important to maintain a good Color Change Precision and to handle Thread breaks and Start at Stich in a good way. With correct settings you should expect an accuracy of 1-2 stitches in almost all cases. Recommendations for Tajima TMEZ-series Recommendations for Tajima TMBR/BP-series Recommendations for Tajima TFMX-series Recommendations for Tajima TEJT-series (Neo) . Coloreel recommended setting in Bold reflects changes from Tajima default Tajima TMEZ-series ITCU Menu position Setting name Recommended setting Corresponding CCP setting in the ITCU Comments 7 Start inching 4 - Set how many times inching is performed when the operation starts again after stopping the machine during embroidery 8 Inching after ATH 4 - Set how many times inching is performed when the operation starts again after data setting or thread trimming 9 Auto Jump NO - If set to other level than NO, the embroidery machine will add main shaft revolutions that the ITCU do not account for. The recommended setting may cause very long stitches and overspeed for the ITCU 10 Jump convert 3 Jump convert: 3 Setting of how many consecutive jump stitches that will cause thread trimming and move the frame to next stitch 12 Auto F.B. after t. Detection No Thread break ties: 0 Setting to perform Frame back automatically at thread breakage. 13 Overlap frame back No - Set a start position of embroidering at head after Frame back. Setting value other than No will confuse the ITCU stitch counting 23 Return stitch 2 Tie ins: 4 Set number of Return stitch (machine added tie ins) at start of embroidery Return stitch length 0,8 Tie stich length: 0,8 Set the stitch length for the return stitch 24 Tie stitch B Tie offs: 2 Set the pattern of Tie stitch (machine added lock stitch) to be executed before thread trimming Tie stitch length 0,8 Tie stich length: 0,8 Set the stitch length for the Tie stitch 26 Upper thread detection 2 - Set the sensitivity of detection when the upper thread breaks. Do not set too sensitive, it may cause false alarms 27 Under thread detection 4 - Set the sensitivity of detection when the under thread breaks. Do not set too sensitive, it may cause false alarms .. Coloreel recommended setting in Bold reflects changes from Tajima default Tajima TMBR/BP-series ITCU Menu position Setting name Recommended setting Corresponding CCP setting in the ITCU Comments F1:1 Jump convert 3 Jump convert: 3 Setting of how many consecutive jump stitches that will cause thread trimming and move the frame to next stitch F1:2 Auto Jump NO - If set to other level than NO, the embroidery machine will add main shaft revolutions that the ITCU do not account for. The recommended setting may cause very long stitches and overspeed for the ITCU F2:3 Main Shaft Inshing 4 - Set how many times inching is performed when the operation starts again after stopping the machine during embroidery Thread break ties: 0 Set to 0 at the Operator Panel F2:6 Upper thread 2 - Set the sensitivity of detection when the upper thread breaks. Do not set too sensitive, it may cause false alarms F2:6 Under (Unit) 4 - Set the sensitivity of detection when the under thread breaks. Do not set too sensitive, it may cause false alarms F2:6 Under (Step ratio) 50% Set the sensitivity of detection when the under thread breaks. Do not set too sensitive, it may cause false alarms F2:9 Tie stitch B Tie offs: 2 Set the pattern of Tie stitch (machine added lock stitch) to be executed before thread trimming F2:9 Tie stitch length 0,8 Tie stich length: 0,8 Set the stitch length for the Tie stitch F2:9 Return stitch 2 Tie ins: 4 Set number of Return stitch (machine added tie ins) at start of embroidery F2:9 M. shaft Inching after thread trimming 4 - Set how many times inching is performed when the operation starts again after data setting or thread trimming F2:9 Return stitch length 0,8 Tie stich length: 0,8 Set the stitch length for the return stitch ... Coloreel recommended setting in Bold reflects changes from Tajima default Tajima TFMX-series ITCU Menu position Setting name Recommended setting Corresponding CCP setting in the ITCU Comments F1:1 Jump convert 3 Jump convert: 3 Setting of how many consecutive jump stitches that will cause thread trimming and move the frame to next stitch F1:2 Auto Jump NO - If set to other level than NO, the embroidery machine will add main shaft revolutions that the ITCU do not account for. The recommended setting may cause very long stitches and overspeed for the ITCU F2:3 Start inching 4 - Set how many times inching is performed when the operation starts again after stopping the machine during embroidery F2:6 Upper thread 2 - Set the sensitivity of detection when the upper thread breaks. Do not set too sensitive, it may cause false alarms F2:6 Under (Unit) 4 - Set the sensitivity of detection when the under thread breaks. Do not set too sensitive, it may cause false alarms F2:9 Return stitch 2 Tie ins: 4 Set number of Return stitch (machine added tie ins) at start of embroidery F2:9 Return stitch length 0,8 Tie stich length: 0,8 Set the stitch length for the return stitch F2:9 Tie stitch B Tie offs: 2 Set the pattern of Tie stitch (machine added lock stitch) to be executed before thread trimming F2:9 Tie stitch length 0,8 Tie stich length: 0,8 Set the stitch length for the Tie stitch F2:9 Inching after ATH 4 - Set how many times inching is performed when the operation starts again after data setting or thread trimming C:5 Frame Back All Head Sew No / No Thread break ties: 0 Setting to perform Frame back automatically at thread breakage. Multi head-setting only. .... Coloreel recommended setting in Bold reflects changes from Tajima default Tajima TEJT-series (Neo) ITCU Menu position Setting name Recommended setting Corresponding CCP setting in the ITCU Comments 6 Jump conversion 3 Jump convert: 3 Setting of how many consecutive jump stitches that will cause thread trimming and move the frame to next stitch 7 Automatic Jump NO - If set to other level than NO, the embroidery machine will add main shaft revolutions that the ITCU do not account for. The recommended setting may cause very long stitches and overspeed for the ITCU 9 Inching 2 Tie ins: 4 Set number of Return stitch (machine added tie ins) at start of embroidery A Tie stiching So, Eo Tie offs: 2 Setting of how many consecutive jump stitches that will cause thread trimming and move the frame to next stitch Thread break ties: 0 Tie stich length: 0,8 Set the stitch length for the Tie offs Tie stich length: 0,8 Set the stitch length for the Tie ins ... Download printer friendly .pdf here: TSD.10016.2 Tajima_Coloreel CCP Settings.pdf 800 KB Download Comments 0 comments Please sign in to leave a comment.